Kits

Product Table Preview Form
Open theme customizer
Category
Filters Sort results
Reset Apply
Product Name
Part Number
Price

4 Layer Kit for QC7000

Item ID Item Description Qty
BM-ALUMINUM-010-1218 10 mil 12" x 18" Aluminum Release Foil 8
BM-COPPER-1-1218 1.0 oz 12" x 18" Copper Foil 8
BM-FR4-1DS-031-1218 31 mil 1.0 oz 12" x 18" Double Sided FR4 Board Material 4
BM-PREPREG-1080-1209 2.6 mil 12"x 18" PREPREG FR4 #1080 16
BM-PREPREG-7628-1218 6.9 mil 12" x 18" PREPREG FR4 #7628 8
BM-TEDLAR-1-1420 1 mil 14" x 20" Tedlar Release Film 8
4 Layer Kit for QC7000
AS-KIT-ML4-7000
$325.00
- +

4.0 Mil Stub End Mill         

 4.0 Mil Stub End Mill         
EM-0040-2S
$50.00
- +

40 mil 0.5 oz 12″ x 18″ Double Sided FR4

12" x 18" DOUBLE SIDED
 40 mil 0.5 oz 12″ x 18″ Double Sided FR4
BM-FR4-HDS-040-1218
$32.00
- +

40 mil 0.5 oz 12″ x 18″ Single Sided FR4 Board Material

 40 mil 0.5 oz 12″ x 18″ Single Sided FR4 Board Material
BM-FR4-HSS-040-1218
$28.00
- +

40 mil 0.5 oz 12″ x 9″ Double Sided FR4 Board Material

 40 mil 0.5 oz 12″ x 9″ Double Sided FR4 Board Material
BM-FR4-HDS-040-1209
$18.00
- +

40 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material

 40 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-HSS-040-1209
$16.00
- +

40 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material

 40 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-HDS-040-1818
$60.00
- +

40 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material

 40 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-HSS-040-1818
$52.00
- +

40 mil 1.0 oz 12″ x 18″ Double Sided FR4

12" x 18" DOUBLE SIDED
 40 mil 1.0 oz 12″ x 18″ Double Sided FR4
BM-FR4-1DS-040-1218
$34.00
- +

40 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material

 40 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-040-1218
$28.00
- +

40 mil 1.0 oz 12″ x 9″ Double Sided FR4 Board Material

 40 mil 1.0 oz 12″ x 9″ Double Sided FR4 Board Material
BM-FR4-1DS-040-1209
$18.00
- +

40 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material

 40 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-1SS-040-1209
$16.00
- +

40 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material

 40 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-1DS-040-1818
$60.00
- +

40 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material

 40 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-040-1818
$52.00
- +

40.0 Mil Drill Bit

 40.0 Mil Drill Bit
DB-0400
$4.50
- +

40.0 Mil Stub End Mill       

 40.0 Mil Stub End Mill       
EM-0400-2S
$12.00
- +

41 mil 1.0 oz 12″ x 18″ Double Sided FR4 TG 180

12" x 18" DOUBLE SIDED
 41 mil 1.0 oz 12″ x 18″ Double Sided FR4 TG 180
BM-FR4-1DS-41E-1218
$35.00
- +

41.0 Mil Drill Bit

 41.0 Mil Drill Bit
DB-0410
$4.50
- +

41.3 Mil Drill Bit

 41.3 Mil Drill Bit
DB-0413
$4.50
- +

42.0 Mil Drill Bit

 42.0 Mil Drill Bit
DB-0420
$4.50
- +

43.0 Mil Drill Bit

 43.0 Mil Drill Bit
DB-0430
$4.50
- +

43.3 Mil Drill Bit

 43.3 Mil Drill Bit
DB-0433
$4.50
- +

45.3 Mil Drill Bit

 45.3 Mil Drill Bit
DB-0453
$4.50
- +

46 mil Flange Diameter, 30 mil Barrel OD, 20 mil Barrel ID Solder Plated Eyelet (Pack of 100)

 46 mil Flange Diameter, 30 mil Barrel OD, 20 mil Barrel ID Solder Plated Eyelet (Pack of 100)
TH-EYE-030-029
$45.00
- +

46.5 Mil Drill Bit

 46.5 Mil Drill Bit
DB-0465
$4.50
- +

46.9 Mil Drill Bit

 46.9 Mil Drill Bit
DB-0469
$4.50
- +

47 mil 0.5 oz 12″ x 18″ Double Sided FR4 Board Material

 47 mil 0.5 oz 12″ x 18″ Double Sided FR4 Board Material
BM-FR4-HDS-047-1218
$34.00
- +

47 mil 0.5 oz 12″ x 18″ Single Sided FR4 Board Material

 47 mil 0.5 oz 12″ x 18″ Single Sided FR4 Board Material
BM-FR4-HSS-047-1218
$30.00
- +

47 mil 0.5 oz 12″ x 9″ Double Sided FR4 Board Material

 47 mil 0.5 oz 12″ x 9″ Double Sided FR4 Board Material
BM-FR4-HDS-047-1209
$18.00
- +

47 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material

 47 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-HSS-047-1209
$16.00
- +

47 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material

 47 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-HDS-047-1818
$62.00
- +

47 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material

 47 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-HSS-047-1818
$54.00
- +

47 mil 1.0 oz 12″ x 18″ Double Sided FR4 Board Material

 47 mil 1.0 oz 12″ x 18″ Double Sided FR4 Board Material
BM-FR4-1DS-047-1218
$38.00
- +

47 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material

 47 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-047-1218
$30.00
- +

47 mil 1.0 oz 12″ x 9″ Double Sided FR4 Board Material

 47 mil 1.0 oz 12″ x 9″ Double Sided FR4 Board Material
BM-FR4-1DS-047-1209
$20.00
- +

47 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material

 47 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-1SS-047-1209
$16.00
- +

47 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material

 47 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-1DS-047-1818
$62.00
- +

47 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material

 47 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-047-1818
$56.00
- +

47 mil Outsite Diameter, 40 mil Inside Diameter Solder Plated Eyelet (Pack of 100)

 47 mil Outsite Diameter, 40 mil Inside Diameter Solder Plated Eyelet (Pack of 100)
TH-EYE-047-034
$45.00
- +

47.2 Mil Drill Bit

 47.2 Mil Drill Bit
DB-0472
$4.50
- +

47.2 mil Fishtail Diamond Cut Contour Router

 47.2 mil Fishtail Diamond Cut Contour Router
CR-0472-F1
$5.00
- +

49.2 Mil Drill Bit

 49.2 Mil Drill Bit
DB-0492
$4.50
- +

5 Axis Quick Mill™

The 5 Axis Quick Mill™ allows a mechanical engineer to make a metal part in the office in less than an hour. The five-axis motion allows for complex shapes and geometries developed by your design team with your CAD/CAM software. Purchase a 5 Axis Quick Mill, design a part, and make it in less than an hour! The 5 Axis Quick Mill is Made in the USA. Learn More
 5 Axis Quick Mill™
QM-H5-888
$0.00

5.0 Mil Stub End Mill         

 5.0 Mil Stub End Mill         
EM-0050-2S
$50.00
- +

50 Mil Drill Bit

 50 Mil Drill Bit
DB-0500
$4.50
- +

50.0 Mil Regular End Mill

 50.0 Mil Regular End Mill
EM-0500-2R
$10.00
- +

51.2 Mil Coated Drill Bit

 51.2 Mil Coated Drill Bit
DB-0512-C1
$4.50
- +

51.2 Mil Drill Bit

 51.2 Mil Drill Bit
DB-0512
$4.50
- +

52.0 Mil Drill Bit

 52.0 Mil Drill Bit
DB-0520
$4.50
- +

53.1 Mil Drill Bit

 53.1 Mil Drill Bit
DB-0531
$4.50
- +

55.0 Mil Drill Bit

 55.0 Mil Drill Bit
DB-0550
$4.50
- +

55.1 Mil Drill Bit

 55.1 Mil Drill Bit
DB-0551
$4.50
- +

55.1 mil Fishtail Diamond Cut Contour Router

 55.1 mil Fishtail Diamond Cut Contour Router
CR-0551-F1
$5.00
- +

55.1 mil Fishtail Diamond Cut Contour Router

 55.1 mil Fishtail Diamond Cut Contour Router
CR-0551-F1
$5.00
- +

57.1 Mil Drill Bit

 57.1 Mil Drill Bit
DB-0571
$4.50
- +

59 mil 0.5 oz 12″ x 18″ Double Sided FR4

12" x 18" DOUBLE SIDED
 59 mil 0.5 oz 12″ x 18″ Double Sided FR4
BM-FR4-HDS-059-1218
$16.00
- +

59 mil 0.5 oz 12″ X 18″ Single Sided FR4

12" x 18" SINGLE SIDED
 59 mil 0.5 oz 12″ X 18″ Single Sided FR4
BM-FR4-HSS-059-1218
$16.00
- +

59 mil 0.5 oz 12″ x 6″ Double Sided FR4

6" x 12" DOUBLE SIDED
 59 mil 0.5 oz 12″ x 6″ Double Sided FR4
BM-FR4-HDS-059-1206
$6.00
- +

59 mil 0.5 oz 12″ x 9″ Double Sided FR4

9" x 12" DOUBLE SIDED
 59 mil 0.5 oz 12″ x 9″ Double Sided FR4
BM-FR4-HDS-059-1209
$10.00
- +

59 mil 0.5 oz 12″ X 9″ Single Sided FR4

9" x 12" SINGLE SIDED
 59 mil 0.5 oz 12″ X 9″ Single Sided FR4
BM-FR4-HSS-059-1209
$10.00
- +

59 mil 1.0 oz 12″ x 18″ Double Sided FR4

12" x 18" DOUBLE SIDED
 59 mil 1.0 oz 12″ x 18″ Double Sided FR4
BM-FR4-1DS-059-1218
$18.00
- +

59 mil 1.0 oz 12″ X 18″ Single Sided FR4

12" X 18" SINGLE SIDED
 59 mil 1.0 oz 12″ X 18″ Single Sided FR4
BM-FR4-1SS-059-1218
$18.00
- +

59 mil 1.0 oz 12″ x 9″ Double Sided FR4

9" x 12" DOUBLE SIDED
 59 mil 1.0 oz 12″ x 9″ Double Sided FR4
BM-FR4-1DS-059-1209
$12.00
- +

59 mil 1.0 oz 12″ X 9″ Single Sided FR4

9" x 12" SINGLE SIDED
 59 mil 1.0 oz 12″ X 9″ Single Sided FR4
BM-FR4-1SS-059-1209
$12.00
- +

59 mil 12″ x 9″ Unclad FR4 Board Material

 59 mil 12″ x 9″ Unclad FR4 Board Material
BM-FR4-0DS-059-1209
$10.00
- +

59 mil 2.0 oz 12″ x 18″ Double Sided FR4

12" X 18" DOUBLE SIDED
 59 mil 2.0 oz 12″ x 18″ Double Sided FR4
BM-FR4-2DS-059-1218
$35.00
- +

59 mil 2.0 oz 12″ X 18″ Single Sided FR4

12" X 18" SINGLE SIDED
 59 mil 2.0 oz 12″ X 18″ Single Sided FR4
BM-FR4-2SS-059-1218
$30.00
- +

59 mil 2.0 oz 12″ x 9″ Double Sided FR4

9" x 12" DOUBLE SIDED
 59 mil 2.0 oz 12″ x 9″ Double Sided FR4
BM-FR4-2DS-059-1209
$12.00
- +

59 mil 2.0 oz 12″ X 9″ Single Sided FR4

9" x 12" SINGLE SIDED
 59 mil 2.0 oz 12″ X 9″ Single Sided FR4
BM-FR4-2SS-059-1209
$12.00
- +

59 mil 2.0 oz 18″ x 24″ Double Sided FR4

18" X 24" DOUBLE SIDED
 59 mil 2.0 oz 18″ x 24″ Double Sided FR4
BM-FR4-2DS-059-1824
$65.00
- +

59 mil 3.0 oz 12″ x 18″ Double Sided FR4

12" X 18" DOUBLE SIDED
 59 mil 3.0 oz 12″ x 18″ Double Sided FR4
BM-FR4-3DS-059-1218
$40.00
- +

59 mil 5.0 oz 12″ x 18″ Double Sided FR4

12" X 18" DOUBLE SIDED
 59 mil 5.0 oz 12″ x 18″ Double Sided FR4
BM-FR4-5DS-059-1218
$45.00
- +

59.1 Mil Drill Bit

 59.1 Mil Drill Bit
DB-0591
$4.50
- +

59.1 mil Fishtail Diamond Cut Contour Router

 59.1 mil Fishtail Diamond Cut Contour Router
CR-0591-F1
$5.00
- +

59.5 Mil Drill Bit

 59.5 Mil Drill Bit
DB-0595
$4.50
- +

6 Layer Kit for QC5000

Item ID Item Description Qty
BM-ALUMINUM-010-1209 10 mil 12" x 9" Aluminum Release Foil 12
BM-COPPER-1-1209 1.0 oz 12" x 9" Copper Foil 12
BM-FR4-1DS-031-1209 31 mil 1.0 oz 12" x 9" Double Sided FR4 Board Material 6
BM-PREPREG-1080-1209 2.6 mil 12"x 9" PREPREG FR4 #1080 24
BM-PREPREG-7628-1209 6.9 mil 12"x 9" PREPREG FR4 #7628 12
BM-TEDLAR-1-1114 1 mil 14" x 14" Tedlar Release Film 12
6 Layer Kit for QC5000
AS-KIT-ML6-5000
$375.00
- +

6.0 Mil Stub End Mill         

 6.0 Mil Stub End Mill         
EM-0060-2S
$50.00
- +

6.9 mil 12″x 18″ PREPREG FR4 #7628

 6.9 mil 12″x 18″ PREPREG FR4 #7628
BM-PREPREG-7628
$10.00
- +

6.9 mil 12″x 9″ PREPREG FR4 #7628

 6.9 mil 12″x 9″ PREPREG FR4 #7628
BM-PREPR-7628-A
$7.00
- +

60 Degree Milling Tool

T-1 Mill Tool (.008" - .012")

60 degree

1/8" shank diameter

1.5" long

Sold in packs of 10

 60 Degree Milling Tool
MILL-T1
$15.00
- +

60 Degree Milling Tool T3 for Mill-T3

MILL-T3 Tool (.008" - .014") 60 degree 1/8" shank diameter 1.5" long Sold in packs of 10
 60 Degree Milling Tool T3 for Mill-T3
MILL-T3
$20.00
- +

60,000 RPM SPEED SPINDLE WITH CONTACT BY TOUCH

T-Tech authorized 6,000 - 60,000 rpm High Speed Spindle replacement part.

Used on QCJ5-60-12,QCJ5-60-24, and QCJ5-60-32
 60,000 RPM SPEED SPINDLE WITH CONTACT BY TOUCH
$4,495.00
- +

60,000 RPM SPINDLE, MANUAL TOOL CHANGE WITH PRECISION COLLET

60,000 RPM spindle motor w/precision tool collet.

 60,000 RPM SPINDLE, MANUAL TOOL CHANGE WITH PRECISION COLLET
$3,995.00
- +

61.0 Mil Drill Bit

 61.0 Mil Drill Bit
DB-0610
$4.50
- +

62 mil 12″ x 18″ Unclad G10 FR4 Board Material

 62 mil 12″ x 18″ Unclad G10 FR4 Board Material
BM-G10-000-059-1218
$27.00
- +

62.0 mil Drill Point Chip Breaker Contour Router

 62.0 mil Drill Point Chip Breaker Contour Router
CR-0620-R2
$5.00
- +

62.0 mil Drill Point Diamond Contour Router

 62.0 mil Drill Point Diamond Contour Router
CR-0620-R1
$5.00
- +

62.0 mil Fishtail Chip Breaker Contour Router

 62.0 mil Fishtail Chip Breaker Contour Router
CR-0620-F2
$5.00
- +

62.0 mil Fishtail Diamond Cut Contour Router

 62.0 mil Fishtail Diamond Cut Contour Router
CR-0620-F1
$5.00
- +

62.5 Mil Drill Bit

 62.5 Mil Drill Bit
DB-0625
$4.50
- +

62.5 Mil Regular End Mill

 62.5 Mil Regular End Mill
EM-0625-2R
$10.00
- +

63.0 Mil Drill Bit

 63.0 Mil Drill Bit
DB-0630
$4.50
- +

63.5 Mil Drill Bit

 63.5 Mil Drill Bit
DB-0635
$4.50
- +

68.9 Mil Drill Bit       

 68.9 Mil Drill Bit       
DB-0689
$4.50
- +

7 mil 12″ x 18″ Adhesive Entry Material

12" x 18"
 7 mil 12″ x 18″ Adhesive Entry Material
BM-ENTRYAD-007-1218
$5.00
- +

7 mil 12″ x 18″ Entry Material

12" x 18"
 7 mil 12″ x 18″ Entry Material
BM-ENTRY-007-1218
$3.00
- +

7 mil 12″ x 9″ Adhesive Entry Material

12" x 9"
 7 mil 12″ x 9″ Adhesive Entry Material
BM-ENTRYAD-007-1209
$3.00
- +

7 mil 12″ x 9″ Entry Material

12" x 9"
 7 mil 12″ x 9″ Entry Material
BM-ENTRY-007-1209
$2.00
- +

7 mil 18″ x 18″ Adhesive Entry Material

18" x 18"
 7 mil 18″ x 18″ Adhesive Entry Material
BM-ENTRYAD-007-1818
$7.00
- +

7.0 Mil Stub End Mill         

 7.0 Mil Stub End Mill         
EM-0070-2S
$35.00
- +

7.9 Mil Drill Bit

 7.9 Mil Drill Bit
DB-0079
$4.50
- +

70.0 Mil Drill Bit       

 70.0 Mil Drill Bit       
DB-0700
$4.50
- +

70.9 Mil Drill Bit       

 70.9 Mil Drill Bit       
DB-0709
$4.50
- +

70.9 mil Fishtail Diamond Cut Contour Router

 70.9 mil Fishtail Diamond Cut Contour Router
CR-0709-F1
$5.00
- +

72.8 Mil Drill Bit       

 72.8 Mil Drill Bit       
DB-0728
$4.50
- +

73.0 Mil Drill Bit       

 73.0 Mil Drill Bit       
DB-0730
$4.50
- +

74.8 Mil Drill Bit       

 74.8 Mil Drill Bit       
DB-0748
$4.50
- +

76.0 Mil Drill Bit       

 76.0 Mil Drill Bit       
DB-0760
$4.50
- +

76.8 Mil Drill Bit       

 76.8 Mil Drill Bit       
DB-0768
$4.50
- +

78.1 Mil Drill Bit      

 78.1 Mil Drill Bit      
DB-0781
$4.50
- +

78.5 Mil Drill Bit       

 78.5 Mil Drill Bit       
DB-0785
$4.50
- +

78.7 Mil Drill Bit       

 78.7 Mil Drill Bit       
DB-0787
$4.50
- +

78.7 mil Fishtail Diamond Cut Contour Router

 78.7 mil Fishtail Diamond Cut Contour Router
CR-0787-F1
$5.00
- +

8 Layer Kit for QC5000

Item ID Item Description Qty
BM-ALUMINUM-010-1209 10 mil 12" x 9" Aluminum Release Foil 16
BM-COPPER-1-1209 1.0 oz 12" x 9" Copper Foil 16
BM-FR4-1DS-031-1209 31 mil 1.0 oz 12" x 9" Double Sided FR4 Board Material 8
BM-PREPREG-1080-1209 2.6 mil 12"x 9" PREPREG FR4 #1080 30
BM-PREPREG-7628-1209 6.9 mil 12"x 9" PREPREG FR4 #7628 16
BM-TEDLAR-1-1114 1 mil 14" x 14" Tedlar Release Film 16
8 Layer Kit for QC5000
AS-KIT-ML8-5000
$400.00
- +

8 mil 0.5 oz 12″ x 18″ Single Sided FR4 Board Material

 8 mil 0.5 oz 12″ x 18″ Single Sided FR4 Board Material
BM-FR4-HSS-008-1218
$18.00
- +

8 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material

 8 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-HSS-008-1209
$10.00
- +

8 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material

 8 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-HDS-008-1818
$45.00
- +

8 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material

 8 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-HSS-008-1818
$35.00
- +

8 mil 1.0 oz 12″ x 18″ Double Sided FR4

12" x 9" DOUBLE SIDED
 8 mil 1.0 oz 12″ x 18″ Double Sided FR4
BM-FR4-1DS-008-1218
$25.00
- +

8 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material

 8 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-008-1218
$20.00
- +

8 mil 1.0 oz 12″ x 9″ Double Sided FR4

12" x 9" DOUBLE SIDED
 8 mil 1.0 oz 12″ x 9″ Double Sided FR4
BM-FR4-1DS-008-1209
$14.00
- +

8 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material

 8 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-1SS-008-1209
$12.00
- +

8 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material

 8 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-1DS-008-1818
$45.00
- +

8 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material

 8 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-008-1818
$38.00
- +

8.0 Mil Stub End Mill         

 8.0 Mil Stub End Mill         
EM-0080-2S
$28.00
- +

8.3 Mil Drill Bit

 8.3 Mil Drill Bit
DB-0083
$4.50
- +

80.0 Mil Stub End Mill       

 80.0 Mil Stub End Mill       
EM-0800-2S
$10.00
- +

80.7 Mil Drill Bit      

 80.7 Mil Drill Bit      
DB-0807
$4.50
- +

81.0 Mil Drill Bit       

 81.0 Mil Drill Bit       
DB-0810
$4.50
- +

82.0 Mil Drill Bit       

 82.0 Mil Drill Bit       
DB-0820
$4.50
- +

82.7 Mil Drill Bit       

 82.7 Mil Drill Bit       
DB-0827
$4.50
- +

84.6 Mil Drill Bit       

 84.6 Mil Drill Bit       
DB-0846
$4.50
- +

86.0 Mil Drill Bit       

 86.0 Mil Drill Bit       
DB-0860
$4.50
- +

86.6 Mil Drill Bit      

 86.6 Mil Drill Bit      
DB-0866
$4.50
- +

89.0 Mil Drill Bit       

 89.0 Mil Drill Bit       
DB-0890
$4.50
- +

9.0 Mil Drill Bit

 9.0 Mil Drill Bit
DB-0090
$4.50
- +

9.0 Mil Stub End Mill         

 9.0 Mil Stub End Mill         
EM-0090-2S
$28.00
- +

9.8 Mil Stub End Mill

 9.8 Mil Stub End Mill
EM-0098-2S
$24.00
- +

90 Degree Milling Tool

T-2 Mill Tool (0.010" - 0.012") 90 degree 1/8" shank diameter 1.425" long Sold in packs of 10
 90 Degree Milling Tool
MILL-T2
$15.00
- +

90 Degree Scoring Milling Tool

T-4 Mill Tool (0.004" - 0.006")

90 degree

1/8" shank diameter

1.5" long

Sold in packs of 10

 90 Degree Scoring Milling Tool
MILL-T4
$24.00
- +

90 Degree Ultra Milling Tool

T-8 Mill Tool (0.006" - 0.010")

90 degree

1/8" shank diameter

1.5" long

Sold in packs of 10

 90 Degree Ultra Milling Tool
MILL-T8
$15.00
- +

90.6 Mil Drill Bit

 90.6 Mil Drill Bit
DB-0906
$4.50
- +

93 mil 0.5 oz 12″ x 18″ Double Sided FR4

12" X 18" DOUBLE SIDED
 93 mil 0.5 oz 12″ x 18″ Double Sided FR4
BM-FR4-HDS-093-1218
$42.00
- +

93 mil 0.5 oz 12″ X 18″ Single Sided FR4

12" x 18" SINGLE SIDED
 93 mil 0.5 oz 12″ X 18″ Single Sided FR4
BM-FR4-HSS-093-1218
$41.00
- +

93 mil 0.5 oz 12″ x 9″ Double Sided FR4 Board Material

 93 mil 0.5 oz 12″ x 9″ Double Sided FR4 Board Material
BM-FR4-HDS-093-1209
$23.00
- +

93 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material

 93 mil 0.5 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-HSS-093-1209
$23.00
- +

93 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material

 93 mil 0.5 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-HDS-093-1818
$90.00
- +

93 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material

 93 mil 0.5 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-HSS-093-1818
$72.00
- +

93 mil 1.0 oz 12″ x 18″ Double Sided FR4

12" X 18" DOUBLE SIDED
 93 mil 1.0 oz 12″ x 18″ Double Sided FR4
BM-FR4-1DS-093-1218
$48.00
- +

93 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material

 93 mil 1.0 oz 12″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-093-1218
$41.00
- +

93 mil 1.0 oz 12″ x 9″ Double Sided FR4 Board Material

 93 mil 1.0 oz 12″ x 9″ Double Sided FR4 Board Material
BM-FR4-1DS-093-1209
$26.00
- +

93 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material

 93 mil 1.0 oz 12″ x 9″ Single Sided FR4 Board Material
BM-FR4-1SS-093-1209
$23.00
- +

93 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material

 93 mil 1.0 oz 18″ x 18″ Double Sided FR4 Board Material
BM-FR4-1DS-093-1818
$90.00
- +

93 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material

 93 mil 1.0 oz 18″ x 18″ Single Sided FR4 Board Material
BM-FR4-1SS-093-1818
$72.00
- +

93 mil 12″ x 18″ Adhesive Backup Material

12" x 18"
 93 mil 12″ x 18″ Adhesive Backup Material
BM-BACKUPAD-093-1218
$10.00
- +

93 mil 12″ x 18″ Backup Material

12" x 18"
 93 mil 12″ x 18″ Backup Material
BM-BACKUP-093-1218
$8.00
- +

93 mil 12″ x 18″ Backup Material with Pre-Drilled Vacuum Array

12" x 18"
 93 mil 12″ x 18″ Backup Material with Pre-Drilled Vacuum Array
BM-BACKUP-093-1218-H
$60.00
- +

93 mil 12″ x 6″ Backup Material

12" x 6"
 93 mil 12″ x 6″ Backup Material
BM-BACKUP-093-1206
$3.00
- +

93 mil 12″ x 9″ Adhesive Backup Material

12" x 9"
 93 mil 12″ x 9″ Adhesive Backup Material
BM-BACKUPAD-093-1209
$6.00
- +

93 mil 12″ x 9″ Backup Material

9" x 12"
 93 mil 12″ x 9″ Backup Material
BM-BACKUP-093-1209
$5.00
- +

93 mil 12″ x 9″ Backup Material with Pre-Drilled Vacuum Array

12" x 9"
 93 mil 12″ x 9″ Backup Material with Pre-Drilled Vacuum Array
BM-BACKUP-093-1209-H
$40.00
- +

93 mil 18″ x 18″ Backup Material

18" x 18"
 93 mil 18″ x 18″ Backup Material
BM-BACKUP-093-1818
$12.00
- +

93.0 mil Fishtail Diamond Cut Contour Router

 93.0 mil Fishtail Diamond Cut Contour Router
CR-0938-F1
$5.00
- +

93.5 Mil Drill Bit       

 93.5 Mil Drill Bit       
DB-0935
$4.50
- +

93.8 Mil Drill Bit       

 93.8 Mil Drill Bit       
DB-0938
$4.50
- +

93.8 mil Drill Point Diamond Contour Router

 93.8 mil Drill Point Diamond Contour Router
CR-0938-R1
$5.00
- +

94.5 Mil Drill Bit       

 94.5 Mil Drill Bit       
DB-0945
$4.50
- +

96.0 Mil Drill Bit       

 96.0 Mil Drill Bit       
DB-0960
$4.50
- +

96.5 Mil Drill Bit       

 96.5 Mil Drill Bit       
DB-0965
$4.50
- +

98.0 Mil Drill Bit       

 98.0 Mil Drill Bit       
DB-0980
$4.50
- +

98.4 Mil Drill Bit       

 98.4 Mil Drill Bit       
DB-0984
$4.50
- +

98.4 mil Fishtail Diamond Cut Contour Router

 98.4 mil Fishtail Diamond Cut Contour Router
CR-0984-F1
$5.00
- +

99.5 Mil Drill Bit       

 99.5 Mil Drill Bit       
DB-0995
$4.50
- +

AMC3500

AMC3500-HS

ADVANCED MOTION CONTROLLER-HS 

The AMC3500 controlls the Quick Circuit family of milling machines. It has a USB 2.0 port to connect to any IBM compatable computer.

 AMC3500
$2,995.00
- +

AMC3500 IsoPro Upgrade Special

USB Controller & IsoPro Upgrade promotion! Trade in your serial controller for a $500.00 instant savings on an AMC3500 USB Controller and IsoPro software bundle! Place Your Order Soon...Quantities Are Limited!
AMC3500 IsoPro Upgrade Special
$2,995.00
- +

ANODE REPLACEMENT KIT FOR QUICK PLATE 1812

 ANODE REPLACEMENT KIT FOR QUICK PLATE 1812
$795.00
- +

ANODE REPLACEMENT KIT FOR QUICK PLATE 912

 ANODE REPLACEMENT KIT FOR QUICK PLATE 912
$495.00
- +

Backup Material

12" X 18"
 Backup Material
$60.00
- +

Backup Material for QC9000

18x18 Backup Material for use with the Quick Circuit Model 9000 series.
 Backup Material for QC9000
$100.00
- +

CAD/CAM Basic Software

 CAD/CAM Basic Software
QM Fusion 360
$495.00
- +

CAD/CAM Deluxe Software

 CAD/CAM Deluxe Software
QM Fusion Deluxe
$1,695.00
- +

Chamfered Tool Blank

 Chamfered Tool Blank
DB-TOOL-BLANK
$4.50
- +

Circuit Board Shear

Printed Circuit Board Shear
 Circuit Board Shear
$749.00
- +

CNC2PCB Conversion License

CNC2PCB Conversion License
 CNC2PCB Conversion License
$895.00
- +

Collets ER32

 Collets ER32
QM Collet Kit
$1,995.00
- +

COMBO SCOPE AND STAND FOR TOOL INSPECTION

 COMBO SCOPE AND STAND FOR TOOL INSPECTION
$495.00
- +

Contour Router Kit

Item ID Item Description Qty
CR-0310-R1 31.0 mil Drill Point Diamond Contour Router 2
CR-0310-R2 31.0 mil Drill Point Chip Breaker Contour Router 2
CR-0620-R1 62.0 mil Drill Point Diamond Contour Router 3
CR-0620-R2 62.0 mil Drill Point Chip Breaker Contour Router 3
Contour Router Kit
AS-KIT-ROUTER
$45.00
- +

COPPER BRIGHTENER 250ML

COPPER BRIGHTENER 250 ml. Bottle

 COPPER BRIGHTENER 250ML
$40.00
- +

COPPER BRIGHTENER 500ML

COPPER BRIGHTENER 500 ml. BOTTLE

 COPPER BRIGHTENER 500ML
$80.00
- +

Drill Bit Kit

Item ID Item Description Qty
DB-0180 18.0 mll Drill Bit 2
DB-0200 20.0 mll Drill Bit 2
DB-0250 25.0 mll Drill Bit 2
DB-0320 32.0 mil Drill Bit 2
DB-0400 40.0 mil Drill Bit 2
Drill Bit Kit
AS-KIT-DRILL
$45.00
- +

DXF to Gerber Conversion License

IsoPro DXF conversion software upgrade
 DXF to Gerber Conversion License
$1,295.00
- +

End Mill Kit

Item ID Item Description Qty
EM-0080-2S 8 mil Stub End Mill 2
EM-0100-2S 10.0 mil Stub End Mill 2
EM-0150-2S 15.0 mil Stub End Mill 2
EM-0200-2S 20.0 mil Stub End Mill 2
EM-0310-2S 31.0 mil Stub End Mill 2
End Mill Kit
AS-KIT-ENDMILL
$350.00
- +

Euro Clean HEPA Filter

HEPA filter for the Euro Clean 930 Series vacuum.
 Euro Clean HEPA Filter
$250.00
- +

Euro Clean HEPA Vacuum Bags

Filter bags for the Euro Clean 930 Series vacuum.

5 bags per package.
 Euro Clean HEPA Vacuum Bags
$25.00
- +

GM-DP-1250

GM-DP-1250 0.125" alignment pins. 1 package of 10 pieces.

 GM-DP-1250
$20.00
- +

GM-DP-1250

GM-DP-1250 0.125" alignment pins. 1 package of 10 pieces.

 GM-DP-1250
$20.00
- +

GM-DP-1250

GM-DP-1250 0.125" alignment pins. 1 package of 10 pieces.

 GM-DP-1250
$20.00
- +

ISO 20

 ISO 20
QM Tool Holder Kit
$995.00
- +

IsoPro Additional Standard License (initial license required)

Additional license if you have an initial IsoPro standard license.
 IsoPro Additional Standard License (initial license required)
$1,295.00
- +

IsoPro Software + Firmware Upgrade (for your initial license after one year from date of purchase)

Upgrade your IsoPro software to the latest version. Check the latest update button to see if you are at the latest version.  
 IsoPro Software + Firmware Upgrade (for your initial license after one year from date of purchase)
$1,695.00
- +

IsoPro Software Upgrade (your initial license)

Upgrade your IsoPro software to the latest version.  
 IsoPro Software Upgrade (your initial license)
$1,295.00
- +

Lab Oven C

This gravity convection oven is designed to meet the laboratory needs of industry, research organizations and schools. Well-crafted and versatile, it can be used for drying, baking, sterilizing, evaporating, heat treating, annealing and testing.

Durable exterior has a hard, scratch-resistant hammer finish. Doors open with high impact thermoplastic handles. Heavy steel double-wall cabinet.

Work space is insulated from the outer cabinet with one inch of high density mineral wool, and interiors are made of corrosive-resistant aluminized steel. Crafted with UL and CSA recognized components. The control panel is equipped with an illuminated ON-OFF rocker switch and a heat/cycle pilot light

Temperature is controlled by an automatic Hydraulic thermostat. Energy efficient, low-watt density sheathed elements are engineered into a compact design for quick run-up and recovery times. Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it evenly.

Specifications:
  • Min Temperature 5 ?C / 41 ?F
  • Max Temperature 225 ?C / 437 ?F
  • Volume 1.27 cu. ft. / 36 L
  • Chamber Dimensions (W x H x D) 13 x 13 x 13" / 33 x 33 x 33 cm
  • Power 115 V / 6.95 A / 800 W
  • Type of Thermostat Hydraulic
  • Operating Temperature Range Ambient +5? to 225?C / Ambient +9? to 437?C
  • Shelves Included/Maximum (1" Centers) 3 (1 Fixed, 2 Adjustable)/13
  • Maximum weight per shelf 35 lbs.
  • Overall Dimensions (W x H x D) 15 x 21 x 15" / 38 x 54 x 38 cm
  • Shipping Weight 59 lb. / 27.7 kg
    •      Lab Oven C
    $1,495.00
    - +

    Lab Oven C

    This gravity convection oven is designed to meet the laboratory needs of industry, research organizations and schools. Well-crafted and versatile, it can be used for drying, baking, sterilizing, evaporating, heat treating, annealing and testing.

    Durable exterior has a hard, scratch-resistant hammer finish. Doors open with high impact thermoplastic handles. Heavy steel double-wall cabinet.

    Work space is insulated from the outer cabinet with one inch of high density mineral wool, and interiors are made of corrosive-resistant aluminized steel. Crafted with UL and CSA recognized components. The control panel is equipped with an illuminated ON-OFF rocker switch and a heat/cycle pilot light

    Temperature is controlled by an automatic Hydraulic thermostat. Energy efficient, low-watt density sheathed elements are engineered into a compact design for quick run-up and recovery times. Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it evenly.

    Specifications:
  • Min Temperature 5 ?C / 41 ?F
  • Max Temperature 225 ?C / 437 ?F
  • Volume 1.27 cu. ft. / 36 L
  • Chamber Dimensions (W x H x D) 13 x 13 x 13" / 33 x 33 x 33 cm
  • Power 115 V / 6.95 A / 800 W
  • Type of Thermostat Hydraulic
  • Operating Temperature Range Ambient +5? to 225?C / Ambient +9? to 437?C
  • Shelves Included/Maximum (1" Centers) 3 (1 Fixed, 2 Adjustable)/13
  • Maximum weight per shelf 35 lbs.
  • Overall Dimensions (W x H x D) 15 x 21 x 15" / 38 x 54 x 38 cm
  • Shipping Weight 59 lb. / 27.7 kg
    •      Lab Oven C
    $1,495.00
    - +

    Laboratory Oven D









    T-Tech's Premium Forced Air Lab Oven. This research laboratory quality oven's 2.5 cubic foot capacity provides engineers with the ability to address multiple or oversized projects.

  • 2.5 cu. ft capacity
  • 120V 60Hz, 11A, 1800w
  • Overall Dimensions 23.5" x 25.75" x 26.0"
  • Supplied with one shelf (holds up to 5)
    • Laboratory Oven D
    $3,995.00
    - +

    Laboratory Oven D









    T-Tech's Premium Forced Air Lab Oven. This research laboratory quality oven's 2.5 cubic foot capacity provides engineers with the ability to address multiple or oversized projects.

  • 2.5 cu. ft capacity
  • 120V 60Hz, 11A, 1800w
  • Overall Dimensions 23.5" x 25.75" x 26.0"
  • Supplied with one shelf (holds up to 5)
    • Laboratory Oven D
    $3,995.00
    - +

    Misc. Drills

         Misc. Drills
    QM Drill Kit
    $1,995.00
    - +

    Misc. Endmills

         Misc. Endmills
    QM End Mill Kit
    $895.00
    - +

    Misc. Router/Ruffing Mill

         Misc. Router/Ruffing Mill
    QM Router Kit
    $350.00
    - +

    Nilfisk HEPA filter

    HEPA filter for the Nilfisk GM80 Series Cleanroom vacuums.
         Nilfisk HEPA filter
    $250.00
    - +

    Nilfisk HEPA Vacuum Bags

    Filter bags for the Nilfisk GM80 series Cleanroom vacuums.

    5 bags per package.
         Nilfisk HEPA Vacuum Bags
    $33.00
    - +

    OA-USB2SERIAL-CABLE

    The new USB to serial cable allows you to control your Quick Circuit AMC2500 controller with a single USB computer port. 

         OA-USB2SERIAL-CABLE
    $79.95
    - +

    Pneumatic Vice Dual

         Pneumatic Vice Dual
    QM Material Clamp Kit
    $3,995.00
    - +

    Pneumatic Z-Axis








    The T-Tech Quick Circuit Pneumatic z-axis upgrade maximizes the performance of the Z-Axis movement on Quick Circuit models QC5000, QC7000, QC9000, and QC1200.

  • Outstanding Performance on Soft or Thin Substrates
  • Minimizes Adjustments between Operations
  • Provides precise control of Z-Axis force exerted on material


    • Call T-Tech for Information on a Retrofit Kit for your existing Quick Circuit Today!
         Pneumatic Z-Axis
    AIR-CYL-KIT-UPGRADE
    $1,495.00
    - +

    QC-Compressor

    This incredibly quiet and affordable air compressor is an ideal solution for Quick Circuit customers who require localized compressed air
    • Air Compressor: Oil Free
    • Motor: 1 HP Ultra Quiet
    • Power: 750W 115V 60Hz
    • Psi: 115
    • Tank: 10 Gallons / 38 Liters
    • Maximum pressure(Mpa): 0.8
    • Starting pressure (Mpa): 0.5
    • Noise(dB): 50
    • Speed (r/min): 1680
    • Capacity: 43.5 (Gallons/Min), 165 (Liters/min)
    • C.F.M.: 5.8
    • Bar: 8
    • 65 Lb Shipping Weight
         QC-Compressor
    $1,495.00
    - +

    QC5000 / QC7000 / 12000 Upper Lead Screw

    Quick Circuit model QC5000 / QC7000 /12000 T-Tech authorized upper lead screw replacement part.
         QC5000 / QC7000 / 12000 Upper Lead Screw
    $395.00
    - +

    QC5000 Lower Lead Screw

    Quick Circuit model QC5000 T-Tech authorized lower lead screw replacement part.
         QC5000 Lower Lead Screw
    $395.00
    - +

    QC5000 Materials Kit

    Item ID Item Description Qty
    BM-BACKUPAD-093-1209 93 mil 12" x 9" Adhesive Backup Material 2
    BM-ENTRY-007-1209 7 mil 12" x 9" Entry Material 2
    BM-FR4-1DS-031-1209 31 mil 1.0 oz 12" x 9" Double Sided FR4 Board Material 16
    OA-QUICKCOAT-125 QUICKCOAT ANTITARNISHING 125ML 1
    QC5000 Materials Kit
    AS-KIT-5000
    $240.00
    - +

    QC7000 / QC9000 Lower Lead Screw

    Quick Circuit model QC7000 / QC9000 T-Tech authorized lower lead screw replacement part.
         QC7000 / QC9000 Lower Lead Screw
    $495.00
    - +

    QC7000 Materials Kit

    Item ID Item Description Qty
    BM-BACKUPAD-093-1218 93 mil 12" x 18" Adhesive Backup Material 4
    BM-ENTRY-007-1218 7 mil 12" x 18" Entry Material 2
    BM-FR4-1DS-031-1218 31 mil 1.0 oz 12" x 18" Double Sided FR4 Board Material 8
    OA-QUICKCOAT-125 QUICKCOAT ANTITARNISHING 125ML 2
    QC7000 Materials Kit
    AS-KIT-7000
    $495.00
    - +

    QC9000 Upper Lead Screw

    Quick Circuit model QC9000 T-Tech authorized upper lead screw replacement part.
         QC9000 Upper Lead Screw
    $495.00
    - +

    QCJ5 PRESSURE FOOT

    T-Tech's QCJ5 Pressure Foot provides a pneumatic air cushion for non-contact during milling. The pressure foot provides precision contact during calibration procedures on your QCJ5.
         QCJ5 PRESSURE FOOT
    $595.00
    - +

    QCJ5 Stand

    L=36″ x W=31″ x H=36″

    The QCJ5 Stand is specifically designed to provide the perfect work and storage space for your QCJ5 system. Our compact and ultra quite air compressor with the Dual HEPA vacuum and your tools and materials conveniently fit inside. With the sound proof materials included your QCJ5 is very quite. L=36" x W=31" x H=36"
         QCJ5 Stand

    L=36″ x W=31″ x H=36″

    $1,500.00
    - +

    QCJ5 TOOL PODS

    5pc Replacement Tool Pods:
    New design replaces the old blue version pods.
    Improved tool gripping.
    Enhanced?precise drill locator.
    More reliable.
         QCJ5 TOOL PODS
    $125.00
    - +

    QCJ5 TOOL PODS

    5pc Replacement Tool Pods:
    New design replaces the old blue version pods.
    Improved tool gripping.
    Enhanced precise drill locator.
    More reliable.
         QCJ5 TOOL PODS
    $125.00
    - +

    QP-ELECTROLYTE-5

    ELECTROLYTE-5 GALLONS
         QP-ELECTROLYTE-5
    $595.00
    - +

    Quick Circuit QC12000 QC12000S-E

    The QC12000 offers T-Tech's longest available work surface. The Quick Circuit model QC12000 is equipped with a oversized 13” x 24” work area. The QC12000 provides everything you need to produce circuit board prototypes within hours. It's generous work area will allow you to address truly unique prototyping applications. Available in Standard Series 8,000 - 24,000 rpm, and High Speed 5,000 - 60,000 rpm spindle speeds. The QC12000 can easily produce your analog, digital or RF/Microwave requirements. The QC12000 system is equipped standard with T-Tech's IsoPro software, which enables automatic data conversion from almost any CAD package. Designed to be intuitive to the engineer, IsoPro software also has the ability to import DXF and export Gerber data.
    Specifications: Model QC12000
    Standard Speed High Speed
    RPM Software Controlled 8-24,000 0-60,000 or 0-100,000
    3 Phase Spindle Power 300 Watts 300 Watts
    Smallest Drill Size .15mm (0.006”) 0.1mm (0.004”)
    Smallest Mill Size .15mm (0.006”) 0.1mm (0.004”)
    Milling Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Traverse Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Drilling Speed 180 Holes/min 180 Holes/min
    Routing Speed 3,800mm/min (150”/min) 4,500mm/min (180”/min)
    Material Size 406mm x 736mm (16”x24”) 406mm x 736mm (16”x24”)
    Work Area 330x609x16 mm (13x24x0.629”) 330x609x16 mm (13x24x0.629”)
    Resolution 0.0012mm (0.0005”) 0.006mm (0.00025”)
    Repeatability  0.008mm (0.00036”) 0.004mm (0.00018”)
    Machine Voltage  80-245 Volts 50/60Hz 80-245 Volts 50/60Hz
    Machine Dimensions 480x710x260mm (15.3x17x10”) 480x710x260mm (15.3x17x10”)
    Machine Weight 30.8 kg (68 lbs) 30.8 kg (68 lbs)
    Tool Change Semi-Automatic Software Prompted Semi-Automatic Software Prompted
    Vacuum Table Optional Optional
    Sound Enclosure / Stand Optional Optional
    Windows Requirements 1.5Ghz Processor  4GB RAM, Windows 7, 8.1, and 10 Pro 64 bit 1.5Ghz Processor  4GB RAM, Windows 7, 8.1, and 10 Pro 64 bit
    Quick Circuit QC12000 QC12000S-E
    $0.00

    Quick Circuit QC5000

    The Quick Circuit model QC 5000 is equipped with a 10" x 13” work area. This system provides you with everything you need to produce circuit board prototypes within hours. Available in Standard Series 8,000 - 24,000 rpm, and High Speed 5,000 - 60,000, or 5,000 - 100,000 rpm spindle speeds. The QC 5000 can easily produce high quality analog, digital, or RF/Microwave prototypes. The Quick Circuit QC 5000 system is equipped standard with T-Tech's IsoPro software, which enables automatic data conversion from almost any CAD package. Designed to be intuitive to the engineer, IsoPro software also has the ability to import DXF, Exellon Drill, and export Gerber data.
    Specifications: Model QC5000
    Standard Speed High Speed
    RPM Software Controlled 8-24,000 5-60,000    or    5-100,000
    3 Phase Spindle Power 300 Watts 300 Watts
    Smallest Drill Size .15mm (0.006”) 0.1mm (0.004”)
    Smallest Mill Size .15mm (0.006”) 0.1mm (0.004”)
    Milling Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Traverse Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Drilling Speed 180 Holes/min 180 Holes/min
    Routing Speed 3,800mm/min (150”/min) 4,500mm/min (180”/min)
    Material Size 350mm x 400mm (14”x16”) 350mm x 400mm (14”x16”)
    Work Area 254x330x16 mm (10x13x0.629”) 254x330x16 mm (10x13x0.629”)
    Resolution 0.0012mm (0.0005”) 0.006mm (0.00025”)
    Repeatability  0.008mm (0.00036”) 0.004mm (0.00018”)
    Machine Voltage  80-245 Volts 50/60Hz 80-245 Volts 50/60Hz
    Machine Dimensions 381x432x254cm (15x17x10”) 381x432x254cm (15x17x10”)
    Machine Weight 22 kg (47 lbs) 22 kg (47 lbs)
    Tool Change Semi-Automatic Software Prompted Semi-Automatic Software Prompted
    Vacuum Table Optional Optional
    Sound Enclosure / Stand Optional Optional
    Windows Requirements 1.5Ghz Processor  4GB RAM,  Windows 10 Pro 64 bit 1.5Ghz Processor  4GB RAM, Windows 10 Pro 64 bit
       
         Quick Circuit QC5000
    QC5000S-EA
    $0.00

    Quick Circuit QC5000 – Refurbished

    The Quick Circuit model QC 5000 is equipped with a 10" x 13” work area. This system provides you with everything you need to produce circuit board prototypes within hours. Available in Standard Series 8,000 - 24,000 rpm, and High Speed 5,000 - 60,000, or 5,000 - 100,000 rpm spindle speeds. The QC 5000 can easily produce high quality analog, digital, or RF/Microwave prototypes. The Quick Circuit QC 5000 system is equipped standard with T-Tech's IsoPro software, which enables automatic data conversion from almost any CAD package. Designed to be intuitive to the engineer, IsoPro software also has the ability to import DXF and export Gerber data.
    Standard Speed
    RPM Software Controlled 8-24,000
    3 Phase Spindle Power 300 Watts
    Smallest Drill Size .15mm (0.006”)
    Smallest Mill Size .15mm (0.006”)
    Milling Speed 3,800mm/min (150”/min)
    Traverse Speed 3,800mm/min (150”/min)
    Drilling Speed 180 Holes/min
    Routing Speed 3,800mm/min (150”/min)
    Material Size 350mm x 400mm (14”x16”)
    Work Area 254x330x16 mm (10x13x0.629”)
    Resolution 0.0012mm (0.0005”)
    Repeatability  0.008mm (0.00036”)
    Machine Voltage  80-245 Volts 50/60Hz
    Machine Dimensions 381x432x254cm (15x17x10”)
    Machine Weight 22 kg (47 lbs)
    Tool Change Semi-Automatic Software Prompted
    Vacuum Table Optional
    Sound Enclosure / Stand Optional
    Windows Requirements 1.5Ghz Processor  4GB RAM,  Windows 7, 8.1 and 10 Pro 64 bit
    Quick Circuit QC5000 – Refurbished
    QC5000-REFUB
    $8,995.00
    - +

    Quick Circuit QC5000 QC5000S-E

    The Quick Circuit model QC 5000 is equipped with a 10" x 13” work area. This system provides you with everything you need to produce circuit board prototypes within hours. Available in Standard Series 8,000 - 24,000 rpm, and High Speed 5,000 - 60,000, or 5,000 - 100,000 rpm spindle speeds. The QC 5000 can easily produce high quality analog, digital, or RF/Microwave prototypes. The Quick Circuit QC 5000 system is equipped standard with T-Tech's IsoPro software, which enables automatic data conversion from almost any CAD package. Designed to be intuitive to the engineer, IsoPro software also has the ability to import DXF and export Gerber data.
    Specifications: Model QC5000
    Standard Speed High Speed
    RPM Software Controlled 8-24,000 0-60,000
    3 Phase Spindle Power 300 Watts 300 Watts
    Smallest Drill Size .15mm (0.006”) 0.1mm (0.004”)
    Smallest Mill Size .15mm (0.006”) 0.1mm (0.004”)
    Milling Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Traverse Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Drilling Speed 180 Holes/min 180 Holes/min
    Routing Speed 3,800mm/min (150”/min) 4,500mm/min (180”/min)
    Material Size 350mm x 400mm (14”x16”) 350mm x 400mm (14”x16”)
    Work Area 254x330x16 mm (10x13x0.629”) 254x330x16 mm (10x13x0.629”)
    Resolution 0.0012mm (0.0005”) 0.006mm (0.00025”)
    Repeatability  0.008mm (0.00036”) 0.004mm (0.00018”)
    Machine Voltage  80-245 Volts 50/60Hz 80-245 Volts 50/60Hz
    Machine Dimensions 381x432x254cm (15x17x10”) 381x432x254cm (15x17x10”)
    Machine Weight 22 kg (47 lbs) 22 kg (47 lbs)
    Tool Change Semi-Automatic Software Prompted Semi-Automatic Software Prompted
    Vacuum Table Optional Optional
    Sound Enclosure / Stand Optional Optional
    Windows Requirements 1.5Ghz Processor  4GB RAM,  Windows 7, 8.1 and 10 Pro 64 bit 1.5Ghz Processor  4GB RAM, Windows 7, 8.1, and 10 Pro 64 bit
       
         Quick Circuit QC5000 QC5000S-E
    $0.00

    Quick Circuit QC7000 QC7000S-E

    The Quick Circuit QC7000 is equipped with a large 13” x 19" work area. This system provides you with everything you need to produce circuit board prototypes within hours. The QC7000 can easily produce analog, digital, or RF/Microwave prototypes. The Quick Circuit QC7000 system is equipped standard with T-Tech's IsoPro software, which enables automatic data conversion from almost any CAD package. Designed to be intuitive to the engineer, IsoPro software also has the ability to import DXF and export Gerber data.
    Specifications: Model QC7000
    Standard Speed High Speed
    RPM Software Controlled 8-24,000 0-60,000 or 0-100,000
    3 Phase Spindle Power 300 Watts 300 Watts
    Smallest Drill Size .15mm (0.006”) 0.1mm (0.004”)
    Smallest Mill Size .15mm (0.006”) 0.1mm (0.004”)
    Milling Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Traverse Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Drilling Speed 180 Holes/min 180 Holes/min
    Routing Speed 3,800mm/min (150”/min) 4,500mm/min (180”/min)
    Material Size 400mm x 610mm (16”x24”) 400mm x 610mm (16”x24”)
    Work Area 330x480x16 mm (13x19x0.629”) 330x480x16 mm (13x19x0.629”)
    Resolution 0.0012mm (0.0005”) 0.006mm (0.00025”)
    Repeatability  0.008mm (0.00036”) 0.004mm (0.00018”)
    Machine Voltage  80-245 Volts 50/60Hz 80-245 Volts 50/60Hz
    Machine Dimensions 480x710x260mm (15.3x17x10”) 480x710x260mm (15.3x17x10”)
    Machine Weight 24 kg (53 lbs) 24 kg (53 lbs)
    Tool Change Semi-Automatic Software Prompted Semi-Automatic Software Prompted
    Vacuum Table Optional Optional
    Sound Enclosure / Stand Optional Optional
    Windows Requirements 1.5Ghz Processor  4GB RAM, Windows 7, 8.1, and 10 Pro 64 bit 1.5Ghz Processor  4GB RAM, Windows 7, 8.1, and 10 Pro 64 bit
    Quick Circuit QC7000 QC7000S-E
    $0.00

    Quick Circuit QC9000 QC9000S-E

    T-Tech's Quick Circuit Standard Series Model QC9000 has the largest overall work area of any of our Quick Circuit models. Equipped with a generous 19" X 19" work surface, you will be able to address even the largest prototyping requirements. The QC9000 is available in Standard Series 8,000 - 24,000 rpm, and High Speed 5,000 - 60,000, or 5,000 - 100,000 rpm spindle speeds. The QC9000 can easily produce high quality analog, digital, or RF/Microwave prototypes. The Quick Circuit QC9000 system is equipped standard with T-Tech's IsoPro software, which enables automatic data conversion from almost any CAD package. Designed to be intuitive to the engineer, IsoPro software also has the ability to import DXF and export Gerber data.
    Specifications: Model QC9000
    Standard Speed High Speed
    RPM Software Controlled 8-24,000 0-60,000 or 0-100,000
    3 Phase Spindle Power 300 Watts 300 Watts
    Smallest Drill Size .15mm (0.006”) 0.1mm (0.004”)
    Smallest Mill Size .15mm (0.006”) 0.1mm (0.004”)
    Milling Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Traverse Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Drilling Speed 180 Holes/min 180 Holes/min
    Routing Speed 3,800mm/min (150”/min) 4,500mm/min (180”/min)
    Material Size 540mm x 610mm (16”x24”) 540mm x 610mm (16”x24”)
    Work Area 480x480x16 mm (19x19x0.629”) 480x480x16 mm (19x19x0.629”)
    Resolution 0.0012mm (0.0005”) 0.006mm (0.00025”)
    Repeatability  0.008mm (0.00036”) 0.004mm (0.00018”)
    Machine Voltage  80-245 Volts 50/60Hz 80-245 Volts 50/60Hz
    Machine Dimensions 480x710x260mm (15.3x17x10”) 480x710x260mm (15.3x17x10”)
    Machine Weight 36 kg (80 lbs) 36 kg (80 lbs)
    Tool Change Semi-Automatic Software Prompted Semi-Automatic Software Prompted
    Vacuum Table Precision Flat Vacuum Table Precision Flat Vacuum Table
    Sound Enclosure / Stand Optional Optional
    Windows Requirements 1.5Ghz Processor  4GB RAM, Windows 7, 8.1, and 10 Pro 64 bit 1.5Ghz Processor  4GB RAM, Windows 7, 8.1 and 10 Pro 64 bit
    Quick Circuit QC9000 QC9000S-E
    $0.00

    Quick Circuit QCJ5 – The Intelligent Solution

    T-Tech’s most technically advanced prototyping system! The QCJ5 series delivers the precision, speed, and automation required to take your prototyping capabilities to the next level. Click Here for more QCJ5 information The QCJ5 empowers the engineer with features such as:
      • 3 Axis Motion Control with over 3.0" of vertical travel
      • Automatic Tool Change with 12, 24 or 32 positions
      • Automatic Depth Control with ContactByTouch
      • Fiducial Recognition and Alignment
      • Tool Bit Detection with CheckByTouch
      • 60,000 or 100,000 RPM variable speed spindles
      • Pre-Touch Pressure Foot
      • 254 mm x 330 mm (10” x 13”) work surface
      • Fully Integrated Precision Flat Vacuum Table
      • Front panel control of common system commands
    Specifications: Model QCJ5
    Standard Speed High Speed
    RPM Software Controlled 0-60,000 0-100,000
    3 Phase Spindle Power 300 Watts 300 Watts
    Smallest Drill Size .15mm (0.006”) 0.1mm (0.004”)
    Smallest Mill Size .15mm (0.006”) 0.1mm (0.004”)
    Milling Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Traverse Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)
    Drilling Speed 180 Holes/min 180 Holes/min
    Routing Speed 3,800mm/min (150”/min) 4,500mm/min (180”/min)
    Material Size 35cm x 40cm (14”x16”) 35cm x 40cm (14”x16”)
    Work Area 25x33x7.6 cm (10x13x3.0”) 25x33x7.6 cm (10x13x3.0”)
    Resolution 0.012mm (0.0005”) 0.006mm (0.00025”)
    Repeatability  0.008mm (0.00036”) 0.004mm (0.00018”)
    Stroke Z-Axis 76mm (3.0”) 76mm (3.0”)
    Machine Voltage  80-245 Volts 50/60Hz 80-245 Volts 50/60Hz
    Machine Dimensions 66x66x50cm (26x26x20”) 66x66x50cm (26x26x20”)
    Machine Weight 45 kg (99 lbs) 49 kg (108 lbs)
    Automatic Tool Change 12, 24, or 32 Tools 12, 24, or 32 Tools
    Axis Motion Control X,Y, and Z Axis Control X,Y, and Z Axis Control
    Automatic Depth Control Standard Standard
    Front Panel Controls Standard Standard
    Pressure Foot System Pre-Touch Pre-Touch
    Vacuum Table Fully Integrated - Standard Fully Integrated - Standard
    Sound Enclosure Standard Standard
    Mac Requirements Intel Processor OSX 10.5 or Newer Intel Processor OSX 10.5 or Newer
    Windows Requirements 1.5Ghz Processor  4GB RAM , Windows 7,8.1 and 10 Professional 64 bit 1.5Ghz Processor  4GB RAM , Windows 7 , 8.1 and 10 Professional 64 bit
    Quick Circuit QCJ5 – The Intelligent Solution
    $0.00

    QUICKCOAT ANTI TARNISHING AND SOLDER ASSIST

    125ml Bottle
         QUICKCOAT ANTI TARNISHING AND SOLDER ASSIST
    $25.00
    - +

    QUICKPLATE CONDUCTIVE INK 25G

    NOTE: This item MUST ship overnight and be kept refrigerated upon receipt.

         QUICKPLATE CONDUCTIVE INK 25G
    $160.00
    - +

    QUICKPLATE CONDUCTIVE INK 50G

    NOTE: This item MUST ship overnight and kept refrigerated upon receipt.
         QUICKPLATE CONDUCTIVE INK 50G
    $295.00
    - +

    Rapid Repair of Any Broken Parts

         Rapid Repair of Any Broken Parts
    QM Quick Service
    $1,295.00
    - +

    RF Microwave Tool Kit

    Item ID Item Description Qty
    EM-0110-2S 11.0 mil Stub End Mill 5
    EM-0150-2S 15.0 mil Stub End Mill 5
    EM-0200-2S 20.0 mil Stub End Mill 5
    EM-0310-2S 31.0 mil Stub End Mill 5
    OA-FG-B25 STD/METRIC GAGE 1
    RF Microwave Tool Kit
    AS-KIT-RFMW
    $350.00
    - +

    Scope 25X Magnification

    25X Magnification Microscope for Inspection of Circuit Boards and Milling Tools, which also include a scale.

         Scope 25X Magnification
    $365.00
    - +

    Set Screw 6-32×1/8 (Pack of 10)

    Setscrew 6-32x1/8, available in packs of 10.
         Set Screw 6-32×1/8 (Pack of 10)
    SCRW-SET6-32X1/8
    $4.50
    - +

    Single Vac HEPA Filtration

         Single Vac HEPA Filtration
    QM VAC
    $895.00
    - +

    Sound Enclosure for Model QC 12000

    L=41.5″ x W=32.625″ x H=16″

    A Sound Enclosure that covers your QC 12000 providing superior noise reduction of less than 60 db.
         Sound Enclosure for Model QC 12000

    L=41.5″ x W=32.625″ x H=16″

    $1,895.00
    - +

    Sound Enclosure for Model QC5000

    L=27″ W=25″ H=16″

         Sound Enclosure for Model QC5000

    L=27″ W=25″ H=16″

    $1,295.00
    - +

    Sound Enclosure for Model QC7000 & QC9000

    L=36″ W=31″ H=16″

     
     
    This sound enclosure allows you to operate your Quick Circuit system in your office environment with less than 55 db of noise. The enclosure is equipped with vents that provide air circulation. Sound Enclosure and Stand are sold separately.
         Sound Enclosure for Model QC7000 & QC9000

    L=36″ W=31″ H=16″

    $1,295.00
    - +

    Stand for all models L=36″ x W=31″ x H=36″

    This stand allows you to place your complete system including the Quick Circuit system with the optional Sound Enclosure. Your Hepa vaccum fits inside the stand reducing vacuum noise. The stand is equipped with specially designed vents that provide air circulation.

    Sound Enclosure and Stand are sold seperately.

         Stand for all models L=36″ x W=31″ x H=36″
    $1,500.00
    - +

    Standard Material Kit For 12″ x 18″

    Item ID Item Description Qty
    MILL-T1 60 Degree Milling Tool 10
    CR-0620-R2 62.0 mil Drill Point Chip Breaker Contour Router 10
    DB-0320 32.0 mil Drill Bit 10
    DB-0400 40.0 mil Drill Bit 5
    DB-0595 59.5 mil Drill Bit 5
    DB-1250 125.0 mil Drill Bit 5
    BM-FR4-HDS-059-1218 59 mil 0.5 oz 12" x 18" Double Sided FR4 Board Material 3
    BM-BACKUP-093-1218 93 mil 12" x 18" Backup Material 3
    BM-ENTRY-007-1218 7 mil 12" x 18" Entry Material 1
    GM-DP-1250 125 mil DOWEL PIN (PKG OF 10) 10
    TH-SIP-32 32 Position SIP Socket Strip (Pack of 10) 1
    OA-FG-B25 STD/METRIC GAGE 1
    Standard Material Kit For 12″ x 18″
    AS-KIT-STD-1218
    $350.00
    - +

    Standard Material Kit For 12″ x 9″

    Item ID Item Description Qty
    BM-BACKUP-093-1209 93 mil 12" x 9" Backup  Material 3
    BM-ENTRY-007-1209 7 mil 12" x 9" Entry Material 1
    BM-FR4-HDS-059-1209 59 mil 0.5 oz 12" x 9" Double Sided FR4 Board Material 3
    MILL-T1 60 Degree Milling Tool 10
    DB-0400 40.0 mil Drill Bit 5
    DB-0595 59.5 mil Drill Bit 5
    DB-1250 125.0 mil Drill Bit 5
    GM-DP-1250 125 mil DOWEL PIN (PKG OF 10) 1
    TH-SIP-32 32 Position SIP Socket Strip (Pack of 10) 1
    CR-0620-F1 62.0 mil Fishtail Diamond Cut Contour Router 10
    DB-0320 32.0 mil Drill Bit 10
    OA-FG-B25 STD/METRIC GAGE 1
    Standard Material Kit For 12″ x 9″
    AS-KIT-STD-1209
    $350.00
    - +

    Student Labkit 12″ x 18″

    Item ID Item Description Qty
    BM-BACKUP-093-1218 93 mil 12" x 18" Backup Material 1
    BM-ENTRY-007-1218 7 mil 12" x 18" Entry Material 1
    BM-FR4-HDS-059-1218 59 mil 0.5 oz 12" x 18" Double Sided FR4 Board Material 1
    CR-0310-R1 31.0 mil Drill Point Diamond Contour Router 2
    CR-0620-R1 62.0 mil Drill Point Diamond Contour Router 2
    DB-0180 18.0 mll Drill Bit 3
    DB-0320 32.0 mil Drill Bit 3
    DB-0400 40.0 mil Drill Bit 3
    DB-1250 125.0 mil Drill Bit 3
    EM-0310-2R 31.0 mil Regular End Mill 2
    GM-AW-0625 1/16 ALLEN WRENCH 1
    GM-DP-1250 125 mil DOWEL PIN (PKG OF 10) 2
    MILL-T3 60 Degree Milling Tool 1
    MILL-T8 90 Degree Ultra Milling Tool 1
    OA-CD-STUDENT ISOPRO STUDENT STUDENT VERSION 1
    SCRW-SET6-32X1/8 6-32X1/8 SET SCREW 2
    Student Labkit 12″ x 18″
    AS-KIT-LAB
    $150.00
    - +

    Student Labkit 12″ x 9″

    Item ID Item Description Qty
    BM-BACKUP-093-1209 93 mil 12" x 9" Backup  Material 2
    BM-ENTRY-007-1209 7 mil 12" x 9" Entry Material 2
    BM-FR4-HDS-059-1209 59 mil 0.5 oz 12" x 9" Double Sided FR4 Board Material 2
    CR-0310-R1 31.0 mil Drill Point Diamond Contour Router 2
    CR-0620-R1 62.0 mil Drill Point Diamond Contour Router 2
    DB-0180 18.0 mll Drill Bit 3
    DB-0320 32.0 mil Drill Bit 3
    DB-0400 40.0 mil Drill Bit 3
    DB-1250 125.0 mil Drill Bit 3
    EM-0310-2R 31.0 mil Regular End Mill 2
    GM-AW-0625 1/16 ALLEN WRENCH 1
    GM-DP-1250 125 mil DOWEL PIN (PKG OF 10) 2
    MILL-T3 60 Degree Milling Tool 1
    MILL-T8 90 Degree Ultra Milling Tool 1
    OA-CD-STUDENT ISOPRO STUDENT STUDENT VERSION 1
    SCRW-SET6-32X1/8 6-32X1/8 SET SCREW 2
    Student Labkit 12″ x 9″
    AS-KIT-LAB-B
    $95.00
    - +

    Surface Mount Reflow Oven-A

    This light weight, compact, stand-alone surface mount reflow oven can be used for reflowing or preheating of many different SMT components. Its reflowing process is automatically controlled by an internal microprocessor. Real time temperature is displayed on the LCD. The oven utilizes IR heating, and is equipped with air cooling.


  • Effective working area: 228x177mm(9"x7")
  • Unit dimension: 300x250x160mm(12"x10"x6")
  • Temperature: to 250?C
  • Power: 600W, 110V, US plug
  • Reflow cycle: 4~8 minutes
    •      Surface Mount Reflow Oven-A
    $1,150.00
    - +

    Surface Mount Reflow Oven-B

    Surface mount reflow oven with infrared radiation and hot air mix heating. Provides automatic soldering mode and temperature curve paragraph. Even temperature distribution with CPU closed loop temperature control, digital display, zero Voltage heater switching. External temperature calibration. Hinged hood creates an oven like environment for reflow. Two heating states Pre-heating ＆ reflow.


  • Working voltage: AC110V
  • Working frequency:60Hz
  • Maximum output power: 1650W
  • Heating methods: infrared radiation and hot air mix heating
  • Working mode: automatic soldering mode, maintenance mode adjustable
  • Temperature curve paragraph: warm-up, heating, soldering, heat preservation / cooling segment.
  • Range of temperature and time on warm-up: 70~150℃, 0~5Min
  • Range of temperature and time on heating: warm-up temperature to 250℃, 0~5Min
  • Range of temperature and time on soldering: heating temperature to 300℃, 0~30s
  • Range of temperature and time on heating preservation: soldering temperature －(0~50℃)
  • Effective soldering area: 305?320mm
  • Unit Size: 460?372?275mm
    • Surface Mount Reflow Oven-B
    $2,125.00
    - +

    T-1,T-2,T-3,T-4,T-8 MillING Tools Kit

    Item ID Item Description Qty
    MILL-T1 60 Degree Milling Tool 2
    MILL-T2 90 Degree Milling Tool 2
    MILL-T3 60 Degree Milling Tool 2
    MILL-T4 90 Degree Scoring Milling Tool 2
    MILL-T8 90 Degree Ultra Milling Tool 2
    T-1,T-2,T-3,T-4,T-8 MillING Tools Kit
    AS-KIT-TMILL
    $150.00
    - +

    T-Tech Dual Vacuum Hose Set

    New Dual Vacuum Hose Set to complement our Quick Circuit systems that includes (2) 6 ft. length hoses, and attachments.
         T-Tech Dual Vacuum Hose Set
    $295.00
    - +

    T-Tech HEPA Dual Vacuum 115 Volt

    We created our new Dual Vacuum to complement our Quick Circuit systems that include a vacuum for the table and a HEPA vacuum for copper particles. T-Tech's HEPA Dual Vacuum features an extra large main filter copper particle bag assuring a steady even airflow, and a large capacity bag for the Vacuum Table.
         T-Tech HEPA Dual Vacuum 115 Volt
    $1,595.00
    - +

    T-Tech HEPA Dual Vacuum 230 Volt

    We created our new Dual Vacuum to complement our Quick Circuit systems that include a vacuum for the table and a HEPA vacuum for copper particles. T-Tech's HEPA Dual Vacuum features an extra large main filter copper particle bag assuring a steady even airflow, and a large capacity bag for the Vacuum Table.
         T-Tech HEPA Dual Vacuum 230 Volt
    $1,595.00
    - +

    T-Tech HEPA filter

    Replacement HEPA filter

    for T-Tech vacuums

         T-Tech HEPA filter
    $49.95
    - +

    T-Tech HEPA Vacuum 115 Volt

    T-Tech's HEPA vacuums feature an extra large main filter assuring a steady even airflow, and a large capacity bag. The T-Tech HEPA vacuum removes particles created during the milling process. Our HEPA filter achieves filtration of 0.3 microns particle size. The voltage for this vacuum is 115 V.

         T-Tech HEPA Vacuum 115 Volt
    $895.00
    - +

    T-Tech HEPA Vacuum 230 Volt

    T-Tech's HEPA vacuums feature an extra large main filter assuring a steady even airflow, and a large capacity bag. The T-Tech HEPA vacuum removes particles created during the milling process. Our HEPA filter achieves filtration of 0.3 microns particle size. This vacuum has a voltage of 230 Volt.

         T-Tech HEPA Vacuum 230 Volt
    $895.00
    - +

    T-Tech HEPA Vacuum Bags

    Filter bags for the T-Tech vacuum. 5 bags per package.
         T-Tech HEPA Vacuum Bags
    $95.00
    - +

    T-Tech Ring Setter

    This tool has two parts. The Ring Setter Base and the Ring Setter Top. It is used to remove and reset rings to 1/8" diameter tools. This tool works with all end mills, pointed tools, contour routers and drills that T-Tech offers.
    T-Tech Ring Setter
    $195.00
    - +

    T-Tech Tool Rings

    10 pc. White plastic Ring Collars for milling and drilling tools.
         T-Tech Tool Rings
    $10.00
    - +

    Tool Grip

    This stainless steel Tool Grip assists in handling the Smallest Milling Tools. This Tool Grip is specially made to T-Tech's specifications and grips an 1/8" Shank with or without a tool ring.

         Tool Grip
    $40.00
    - +

    Tool Inspection Stand for the 25X Scope

    Tool Inspection Stand for the 25X Scope. This stand holds the tool the correct distance from the loop to have the tip of the tool in focus for inspection. There are two positions for the tool, vertical and horizontal for inspection. You will determine not only if your tool is broken but also if your drill is dull.

         Tool Inspection Stand for the 25X Scope
    $130.00
    - +

    Tools for Collets, Holder, Rack

         Tools for Collets, Holder, Rack
    QM Accessories Kit
    $750.00
    - +

    Vacuum Array Backup Material

    18"x 12"
         Vacuum Array Backup Material
    $300.00
    - +

    Web-Based Remote Training – 2 Days

         Web-Based Remote Training – 2 Days
    QM Training**
    $1,995.00
    - +

    X / Y Stepper Motor Replacement

    Replacement Stepper Motor for all X or Y axis For Quick Circuit QC5000, QC7000, QC9000, QC12000 and QCJ5 prototyping systems.
         X / Y Stepper Motor Replacement
    $150.00
    - +

    Z- Axis Stepper Motor Replacement

    Z- Axis Stepper Motor Replacement
    Used for QCJ5 prototyping system
         Z- Axis Stepper Motor Replacement
    $150.00
    - +

    Z-Axis Solenoid

    T-Tech Authorized Z-Axis solenoid replacement part.

         Z-Axis Solenoid
    $225.00
    - +
    12
    Shopping Cart